MCSE자격증 70-215덤프

MCDBA Microsoft Backoffice 제품 중에서 SQL Server 에 대한 지식을 인 MCSE(Microsoft Certified Systems Engineer) 인증은 비즈니스 요구 사항을 분석증하는 자격증 입니다. 타 벤더사의 Database 자격증과 달리 Microsoft 에서는 OS 를 보유하고 있는 업체라 기본적인 OS(OS 라 하여도 SQL Serer 가 돌아갈 수 있는 Server OS) 지식과 함께 SQL Server에 대한 지식, 그리고 DB 와 연동하여 개발을 할 수 있는 기초 지식까지를 요구하고 있습니다

합격률 100%의 덤프를 소개합니다.killtest는 고객님의 시험통과를 목표로 끓임없는 노력을 기울이고 있습니다.당신의 광림을 기대하겠습니다.그럼 오늘 좋은 하루 되세요

시험번호: 70-215

시험이름: Installing, Configuring and Administering Microsoft Windows 2000 Server
Q&A: 199 Q&As
가격(달러): $ 29.00 USD
시험문제:
1.You are the administrator of your company’s network.You are implementing a virtual private
network (VPN). You want to use the VPN to allow remote users using the PPTP or L2TP protocol to
access resources on your company’s network. The Routing and Remote Access server that will
provide VPN access is located behind a firewall. The firewall is configured to allow the GRE
protocol. The firewall is also configured to pass ICMP, port 1701, port 1723 for the PPTP control
service,TCP port 25 for SMTP, port 4500 for IPSec NAT-T, and port 80 for HTTP. These are the only
ports enabled for TCP. After successfully configuring the Remote Access Server, your attempt to
connect over the Internet by using an L2TP connection fails. Howerver, you are able to connect
successfully using PPTP. What action should you take at the firewall to allow access to the VPN
server using an L2TP connection? (Each correct answer presents part of the solution. Choose
two.)
A.Enable ports 137, 138, and 139 for NetBIOS.
B.Enable UDP Port 53 for DNS.
C.Enable UDP port 500 for IKE.
D.Enable port 50 for IPSec ESP.
E.Enable port 135 for the RPC port mapper service.
Correct:C D
2.You are the administrator of your company’s network.Your network contains Windows 2000
Server computers. All servers are configured as SNMP agents. Two management consoles named
Monitor1 and Monitor2 are used to monitor all servers in the company. Monitor1 and Monitor2 run
a network management software application that uses SNMP. You are responsible for monitoring a
server named Server1. You monitor this server from Monitor1. Other administrators are able to
monitor servers from Monitor2.You must ensure that only Monitor1 is able to monitor Server1
using the network management software application.What should you do?
A.Remove all community names from Server1.
B.Remove all community names from Monitor2.
C.Configure the SNMP service on Server1. Select the Only Accept SNMP Packets from These Hosts
option. Add the host name for Monitor1.
D.Configure the SNMP service on Monitor1. Select the Only Accept SNMP Packets from These Hosts
option. Add the host name for Server1.
Correct:C
3.You are the administrator of your company’s network.The network consists of Windows 2000
Server computers, NetWare servers and Windows 2000 Professional client computers. All of the
Windows 2000 Server and Windows 2000 Professional computers are members of a single domain.
You want the client computers to be able to connect to resources on the NetWare servers with the
least amount of administrative effort.What should you do?
A.Install and configure Gateway Services for NetWare on a Windows 2000 Server computer.
B.Install and configure File and Print Services for NetWare on a Windows 2000 Server computer.
C.Install and configure Client Services for NetWare on a Windows 2000 Server computer.
D.Install and configure Client Services for NetWare on the Windows 2000 Professional computers.
Correct:A

매달 제시간에 업데이트 할테니까 걱정하지 마세요.
우리회사 홈페이지 바로가기:http://www.killtest.kr/
No Comments

MCSE인증시험 덤프 70-299

안녕하세요. 여러분 IT인증시험때문에 수고가 많으십니다. 합격률 100% 덤프가 바로 여러분의 지름길이 되어드리겠습니다.저희회사 홈페이지 오셔서 둘러보십시요. 저희 회사의 최신덤프가 여러분의 걱정을 덜어드릴 것입니다.시험을 보기로 결심한 각 응시자는 가장 안전하고 최신의 공부 자료들을 여기서 받을 수 있을 것입니다.우리의 목적은 확실하게 고객님 시험을 합격하게 하는 것입니다.그럼 좋은 하루 되십시오.

시험번호: 70-299

시험이름: Implementing and Administering Security in a Microsoft Windows Server 2003 Network
Q&A: 42 Q&As
가격(달러):$ 49.00 USD
시험문제:
1.You are a security administrator for your company. The network includes a public key infrastructure (PKI)
that supports smart card logon. All client computers have smart card readers. Managers are issued smart
cards. Managers are required to use smart cards when logging on to client computers. You need to
ensure that managers are required to use a smart card when logging on to any client computer and that
all other users are required to use a smart card when logging on to a client computer assigned to a
manager. Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A.On the properties of each user account used by a manager, select the Smart card required for
interactive logon check box.
B.On the computer account for each manager’s client computer, edit the DACL so that only managers are
assigned the Allow - Allowed to authenticate permission.
C.Place all client computers used by managers in an organizational unit (OU). Link a new Group Policy
object (GPO) to the OU. Configure the GPO to enforce the Interactive logon: Require smart card setting.
D.Place all client computers used by managers in an organizational unit (OU). Link a new Group Policy
object (GPO) to the OU. Configure the GPO to set the startup type of the Smart Card service to
Automatic.
Answer: A C
2.You are a security administrator for your company. The network consists of an Active Directory forest
that contains two domains. The domains are named treyresearch.com and litwareinc.com. All Active
Directory domains are running at a Windows Server 2000 mixed mode functionality level. Employees in
the help desk department need to modify certain attributes of employee user accounts that reside in the
treyresearch.com domain. The help desk department user accounts reside in the litwareinc.com domain.
You need to create a single group named Help Desk that contains all help desk department user accounts
and that can be granted access to modify the employee user accounts in the treyresearch.com domain.
What should you do?
A.Use a universal security group in the treyresearch.com domain named Help Desk.
B.Use a universal security group in the litwareinc.com domain named Help Desk.
C.Use a global security group in the litwareinc.com domain named Help Desk.
D.Use a global security group in the treyresearch.com domain named Help Desk.
Answer: C
4. You are a security administrator for your company. The network consists of two Active Directory
domains. These domains each belong to separate Active Directory forests. The domain named
graphicdesigninstitute.com is used primarily to support company employees. The domain named
fineartschool.net is used to support company customers. The functional level of all domains is Windows
Server 2003 interim mode. A one-way external trust relationship exists in which the
graphicdesigninstitute.com domain trusts the fineartschool.net domain.
A Windows Server 2003 computer named Server1 is a member of the fineartschool.net domain. Server1
provides customers access to a Microsoft SQL Server 2000 database. The user accounts used by
customers reside in the local account database on Server1. All of the customer user accounts belong to a
local computer group named Customers. SQL Server is configured to use Windows Integrated
authentication.
Your company has additional SQL Server 2000 databases that reside on three Windows Server 2003
computers. These computers are member servers in the graphicdesigninstitute.com domain. The
company’s written security policy states that customer user accounts must reside on computers in the
fineartschool.net domain.
You need to plan a strategy for providing customers with access to the additional databases. You want to
achieve this goal by using the minimum amount of administrative effort.
What should you do?
A.Create a new user account in the fineartschool.net Active Directory domain for each customer. Create a
universal group in the fineartschool.net domain. Add the new customer domain user accounts as
members of the new universal group. Assign this group permissions to access the databases.
B.Create a new user account in the fineartschool.net Active Directory domain for each customer. Create a
global group in the fineartschool.net domain. Add the new customer domain user accounts as members
of the new global group. Assign this group permissions to access the databases.
C.Create a new user account in the graphicdesigninstitute.com Active Directory domain for each
customer. Create a global group in the fineartschool.net Active Directory domain. Assign the new global
group permissions to access the databases.
D.Create a new user account in the graphicdesigninstitute.com Active Directory domain for each
customer. Create a universal group in the fineartschool.net Active Directory domain. Assign the new
universal group permissions to access the databases.
Answer: B

매달에 제시간 업데이트 할테니까 걱정하지 마세요!

저희회사의 홈페이지 바로가기:www.killtest.kr

No Comments

정보 70-232 29달러

MCSE(Microsoft Certified Systems Engineer) 인증은 비즈니스 요구 사항을 분석하고Microsoft Windows 2000 플랫폼과 Microsoft 서버 소프트웨어를 기반으로 비즈니스 솔루션용 인프라를 설계하고 구현하는 전문가들을 위한 프리미어 인증입니다. 100%의 합격률  후회하지 않으 실거라 믿습니다. 많이 애용해 주십시오감사합니다! 그럼 좋은 하루 되세요!시험번호: 70-232

시험이름: Implementing and Maintaining Highly Available Web Solutions with MS W2K Server Technologies
Q&A: 100 Q&As
가격(달러):$ 29.00 USD
시험문제:
1. You are the Application Center 2000 administrator for your company. You are responsible for deploying
applications from an Application Center staging server to an Application Center production Web cluster
that uses Network Load Balancing (NLB).
For testing purposes, you assign only 10.1.1.17 to the new Web site in Internet Information Services (IIS).
You successfully test www.tailspintoys.com on the staging server. You then create an application named
Tailspin, which only contains the www.tailspintoys.com Web site. You deploy Tailspin to the production
Web cluster.
After the deployment, you cannot access the new Web site on the production Web cluster. The network
configuration is shown in the exhibit. (Click the Exhibit button.)
You need to enable users to access www.tailspintoys.com, and you need to prevent similar problems with
future deployments. What should you do?

A. Remove the 10.1.1.17 IP address binding to www.tailspintoys.com in IIS on the staging server, and
then redeploy Tailspin.
B. Remove the 10.1.1.17 IP address binding from the network adapter on the staging server, and then
redeploy Tailspin.
C. Add the 10.1.1.17 IP address binding to www.tailspintoys.com in IIS on the production Web cluster, and
then redeploy Tailspin.
D. Add the 10.1.1.17 IP address binding to the front-end network adapter on the production Web cluster,
and then redeploy Tailspin.
Answer: A
2. You are the Application Center 2000 administrator for your company. You are setting up an Application
Center cluster that initially contains only two servers. The Application Center cluster uses Network Load
Balancing (NLB) and uses the same IP address across the front-end network. The network configuration
is shown in the exhibit. (Click the Exhibit button.)
After you successfully install Application Center, you test the Web site that the Application Center
application is managing. From the internal network, the Web site responds properly. From the Internet,
you receive the following error message: “The page cannot be displayed.”
You need to make the Web site functional from the Internet. What should you do?

A. Change the IP address of the front-end network adapters of Server1 and Server2 to a valid
Internet-routable address.
B. Change the IP address of the back-end network adapters of Server1 and Server2 to a valid
Internet-routable address.
C. Change the IP subnet of the front-end network adapter of Server1 to equal the IP subnet of the
back-end network adapter on Server2.
D. Change the IP subnet of the front-end network adapter of Server1 to equal the IP subnet of the
front-end network adapter of Server2.
Answer: A
3. You are the Web site administrator for your company. Your Web site uses a Network Load Balancing
(NLB) cluster to load balance Web requests across the cluster. Your NLB cluster consists of three servers
named Server1, Server2, and Server3.
After reviewing the Internet Information Services (IIS) logs on the three servers, you realize that only
Server2 is receiving network requests. You examine the NLB parameters on the port rules of the three
servers. The port rules are defined on the servers as shown in the following table.

You need to load balance the Web request traffic equally across the three servers. Session state
information does not need to be maintained.
Which three actions should you take? (Each correct answer presents part of the solution. Choose three.)
A. Change the mode on all the servers to Disabled.
B. Change the mode on all the servers to Multiple.
C. Set the load to 50 on all the servers.
D. Set the load to 0 on all the servers.
E. Change the affinity on all the servers to Single.
F. Change the affinity on all the servers to None.
G. Change the affinity on all the servers to Class C.
Answer: BCF

매달에 제시간 업데이트 할테니까 걱정하지 마세요!

저희회사의 홈페이지 바로가기:www.killtest.kr

No Comments

MCSE 자격증 70-655

안녕하세요.MCSE 자격증 따시느라 수고하십니다.오늘은 제가 70-655덤프를 소개드립니다.저희 덤프를 사용하셔서 100%의 통과률로 많은 손님들이 호평을 아끼지 않습니다.여기는 제일빠른 IT정보,제일 빠른 업데이트,걱정없이 도와드리는 우리 서비스.killtest 브랜드는 우리 전체직원의 꾸준하고 알뜰하게 가꾼 끝에 이루어 졌습니다.부디 많은 사랑과 애용을 부탁 드립니다.그럼 좋은 하루 되세요.

시험번호: 70-655

시험이름: TS:Windows Vista & Serv Op Systems, Pre-Installing for OEMs
Q&A: 75 Q&As
가격(달러): $ 169.00 USD
업그레이트: Jan-08-2010
1.You are an IT professional who work in an international company which is named Wiikigo. You are
experienced in deploying and maintaining Windows Vista desktops and Microsoft Office 2007. In the
company, your job is to handle issues involving desktop and server image deployments and to provide
technical support for the company. There is a single Active Directory domain named wiikigo.com in your
company network. There is an answer file for Windows Vista. After you download and update for Windows
Vista, the update file is copied to a distribution share by you. You must make sure that when you install
Windows Vista on all new computers by using the answer file, the update is installed automatically. You
should use as little administrative effort as possible. So what action should you perform to achieve the
goal?
A.After the .cab files are extracted from the update file, the .cab files should be copied to the Packages
folder in the distribution share. At last you have to update the answer file
B.After install.wim is mounted from the Windows Vista installation media, the update has to be installed on
the computer. At last you have to unmount the image and commit the changes.
C.After the update file is copied to the Packages folder in the distribution share, you have to update the
answer file.
D.After boot.wim is mounted from the Windows Vista installation media, the update file has to be updated
to %systemroot%\system32\softwaredistribution. At last you have to unmount the image and commit the
changes.
Answer:A
2.You are an IT professional who work in an international company which is named Wiikigo. You are
experienced in deploying and maintaining Windows Vista desktops and Microsoft Office 2007. In the
company, your job is to handle issues involving desktop and server image deployments and to provide
technical support for the company. There is a single Active Directory domain named wiikigo.com in your
company network. There is a Windows Vista computer in your company. Now the company wants an
image of the computer to be created and the image file must use as little disk space as possible. Since
you are the technical support, the company assigns this task to you. So what action should you perform to
accomplish this task?
A.In order to accomplish this task, you should run Imagex.exe and the /split and /append parameters have
to be specified.
B.In order to accomplish this task, you should run Oscdimg.exe and the -joliet and iso parameters have to
be specified.
C.In order to accomplish this task, you should run Imagex.exe and specify the /compress and /capture
parameters have to be specified.
D.In order to accomplish this task, you should run Oscdimg.exe and specify the -udf and optimize
parameters have to be specified.
Answer:C
3.You are an IT professional who work in an international company which is named Wiikigo. You are
experienced in deploying and maintaining Windows Vista desktops and Microsoft Office 2007. In the
company, your job is to handle issues involving desktop and server image deployments and to provide
technical support for the company. There is a single Active Directory domain named wiikigo.com in your
company network. Recently your company purchases 15 new computers. Since you are the technical
support, the company asks you to have these computers installed with Windows Vista. You decide to use
the Windows Vista DVD and a USB drive to perform an automatic deployment. The USB drive contains an
unattended installation script. A third-party driver is required for the mass storage controllers of the
computers. You must make sure that on the computers, you can perform the unattended installation of
Windows Vista. So what action should you perform first?
A.First the mass storage device driver should be copied to a Windows Preinstallation Environment
(Windows PE) build environment.
B.After each computer from Windows Preinstallation Environment (Windows PE) is started, you have to
press F6.
C.First you should use Windows System Image Manager (Windows SIM) to create and modify an answer
file.
D.First the mass storage device driver should copied to the sources folder of the installation share.
Answer:C

매달에 제시간 업데이트 할테니까 걱정하지 마세요!

저희회사의 홈페이지 바로가기:www.killtest.kr

No Comments

70-625 1월8일 최신 업데이트

안녕하세요!즐거운 주말 보내셨어요?아침햇살이 너무 부드럽네요. 오늘은 여러분에게70-625소개해 드리고 싶습니다. 합격률 100% 덤프가 바로 여러분의 지름길이 되어드리겠습니다. 인증시험문제를 구매한 고객분들은 일년 동안 무료로 업그레이드서비스를 받을수도 있습니다.생각만 하지 마시고 실천해보시는것이 더 낳지 않나요?그럼 고객님 광림을 기대하겠습니다.

시험번호: 70-625

시험이름: TS: Connected Home Integrator
Q&A: 40 Q&As
가격(달러): $ 179.00 $ 159.00 USD
업그레이트: Jan-08-2010
시험문제:
1.You are a technical support of an international corporation which is named Wiikigo. And you are
experienced at Windows vista installation, security management, and troubleshooting. In the company,
your job is to recommend, implement, and troubleshoot solutions that utilize the Windows Vista Platform.
There is a portable computer owned by a customer. Windows Vista and a built-in wireless network
adapter are deployed in the computer. A wireless broadband router is installed by utilizing the default
settings. And it is reported by the customer that the wireless signal strength from the portable computer is
not consistent. The signal strength changes from poor to excellent. You have found that no consumer
electronics which can interfere with the router. You need to find out why the signal strength is not
consistent and solve the problem. From the following 4 options, which two actions will you choose to
perform? (Choose more than one.)
A.The wireless network adapter should be configured to utilize the 802.11g wireless mode.
B.The wireless network adapter should be configured to utilize a Service Set Identifier (SSID) that
matches the name of the network.
C.The Connect should be selected even if the check box is not broadcasted by network.
D.The wireless broadband router should be configured to utilize a unique Service Set Identifier (SSID).
E.The Transmit Power setting of the wireless network adapter should be configured to Medium.
Answer:B D
2.You are a technical support of an international corporation which is named Wiikigo. And you are
experienced at Windows vista installation, security management, and troubleshooting. In the company,
your job is to recommend, implement, and troubleshoot solutions that utilize the Windows Vista Platform.
A Windows Home Server (WHS) computer is installed for a customer. The WHS computer can be
accessed from the Internet and Web Site Connectivity has been turned on. The customer should be
provided with remote access on the WHS computer. Which action will you perform?
A.Media Sharing should be enabled.
B.The Windows Home Server Connector software should be installed.
C.The Routing and Remote Access service should be set to Automatic and the service should be
rebooted.
D.A user account should be created for the customer.
Answer:D
3.You are a technical support of an international corporation which is named Wiikigo. And you are
experienced at Windows vista installation, security management, and troubleshooting. In the company,
your job is to recommend, implement, and troubleshoot solutions that utilize the Windows Vista Platform.
A portable computer is owned by a customer and Windows Vista is run in the computer. There is a built-in
wireless network adapter in the computer. The portable computer gain access to wireless network by
utilizing a wireless broadband router. Its Service Set Identifier (SSID) broadcast of the router is
deactivated. The wireless network cannot be accessed by portable computer. You need to find out why
the portable computer cannot connect to the wireless network and solve the problem. What will you do?
(Choose more than one)
A.The wireless network adapter should be configured by selecting the Connect even if check box is not
broadcasted by the network.
B.You should click the Manually connect to a wireless network button, and then access the network name
information for the wireless network.
C.The Dynamic Host Configuration Protocol (DHCP) client node type should be configured to the
broadcast-node option.
D.The Ad Hoc Power Management option should be enabled on the wireless network adapter.
E.The wireless network adapter should be configured to utilize an ad hoc network type.
Answer:A B

매달에 제시간 업데이트 할테니까 걱정하지 마세요!

저희회사의 홈페이지 바로가기:www.killtest.kr

No Comments

인증 덤프 70-241 입니다

안녕하세요. 여러분 IT시험때문에 수고가 많으십니다.MCSE(Microsoft Certified Systems Engineer) 인증은 비즈니스 요구 사항을 분석하고Microsoft Windows 2000 플랫폼과 Microsoft 서버 소프트웨어를 기반으로 비즈니스 솔루션용 인프라를 설계하고 구현하는 전문가들을 위한 프리미어 인증입니다. 구현 업무에는 네트워크시스템 설치, 구성 및 문제 해결이 포함됩니다.최신덤프가 여러분의 걱정을 덜어드릴 것입니다.시험을 보기로 결심한 각 응시자는 가장 안전하고 최신의 공부 자료들을 여기서 받을 수 있을 것입니다.우리의 목적은 확실하게 고객님 시험을 합격하게 하는 것입니다.그럼 좋은 하루 되십시오.

시험번호: 70-241

시험이름: TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2006 R2
Q&A: 75 Q&As
가격(달러): $ 79.00 $ 59.00 USD
1.You work in an international company which is named TXTWIN. And you’re in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop three schemas all of which have a
property named AccountID. They’re respectively named Account, AccountOrder, and AccountAnswer.
Now you create an orchestration which performs the following steps in sequence, the orchestration
contains one Send shape, two Receive shapes, and several other shapes. First, the orchestration
receives an incoming document, and the document matches the Account schema, second it maps the
incoming document to the AccountOrder schema, and then it sends the AccountOrder message to the
MessageBox database, receives messages that match the AccountAnswer schema back from the
MessageBox database. At last if the AccountAnswer message indicates any errors, it logs a message to
the event log. You develop a correlation set named CorrelationAccountID and a correlation type. Both of
them re on the basis of the AccountID property. Now you have been assigned a task that you must ensure
that multiple instances of the orchestration can run simultaneously, besides this, you must make sure that
each one can process a unique account ID. In order to assure this, what actions should you do? (choose
more than one)
A.On the Send shape, you should initialize CorrelationAccountID.
B.On the first Receive shape, you should initialize CorrelationAccountID.
C.On the second Receive shape, you should initialize CorrelationAccountID.
D.On the second Receive shape, you should set the Following Correlation property. Make it be equal to
CorrelationAccountID.
E.On the Send shape, you should set the Following Correlation property. Make it to be equal to
CorrelationAccountID.
Answer:A D
2.You work in an international company which is named TXTWIN. And you’re in charge of the company
network and use Microsoft BizTalk Server 2006 R2. You develop an orchestration which contains several
steps. You intend to use Business Activity Monitoring (BAM) to track the orchestration. You create a BAM
definition. The BAM definition has several activities. What should you do to modify the dimensions that
are associated with these activity components?
A.You should utilize the Tracking Profile Editor (TPE).
B.You should modify the Pivot Table Field List by using Microsoft Excel.
C.You should use the Business Activity Monitoring Activity Definition Wizard.
D.You should create a new rule in the policy by using the Business Rule Composer.
Answer:C
3.You work in an international company which is named TXTWIN. And you’re in charge of the company
network and use Microsoft BizTalk Server 2006 R2. The PassThru receive pipeline is used by a receive
port. Inbound SOAP messages are not being validated against schemas. At the earliest stage in the
receive pipeline, what should you do to validate the messages against the envelope and body schemas?
A.First, you should configure the receive port and make it use the default XML receive pipeline. Second,
the EnvelopeSpecNames property of the pipeline should be set to the envelope schema.
B.First, you should create a custom receive pipeline. Add an XML validator in the Validate phase. Then
configure the receive port and make it use the custom receive pipeline. Before you perform this, the
Document schemas collection should be set to the envelope and body schemas.
C.First, you should create a custom receive pipeline and add an XML disassembler in the Disassemble
phase. And then configure the receive port and make it use the custom receive pipeline. Before you
perform this, you should set the envelope and body schemas and the Validate document structure
property should be set to True.
D.First, you should create a custom receive pipeline and add a flat file disassembler in the Disassemble
phase. And then configure the receive port and make it use the custom receive pipeline. Before you
perform this, the Validate document structure property should be set to True and you should set the
envelope and body schemas.
Answer:C

매달에 제시간 업데이트 할테니까 걱정하지 마세요!

저희회사의 홈페이지 바로가기:www.killtest.kr

No Comments

MCSE 70-217 덤프

  안녕하세요.요즘 여러분께서 Microsoft 인증시험 보시느라 수고가 많겠습니다. 세상 살아가기가 쉽지 않네요.그리고 시험이라는게 너무 고지식한것 같아서요 하는 말인데 그나마 시험이라도 쉽게 통과하자는 분들이 있지않을가요? 합격률 100% 덤프가 바로 여러분의 지름길이 되어드리겠습니다. 인증시험문제를 구매한 고객분들은 일년 동안 무료로 업그레이드 서비스를 받을수도 있습니다.생각만 하지 마시고 실천해보시는것이 더 낳지 않나요?그럼 고객님 광림을 기대하겠습니다.

 저희회사의 홈페이지 바로가기:http://www.killtest.kr

 시험번호: 70-217

 시험이름: Implementing and Administering a Microsoft Windows 2000 Directory Services Infrastructure
 Q&A: 86 Q&As
 가격(달러): $ 49.00 $ 29.00 USD

1. You add a new domain controller named GC01 to your network to take the place of the existing global
catalog server. You also enable GC01 as a global catalog. You want to use GC00, the original server, as
a domain controller, but not as aglobal catalog server for the domain. You want to increase disk space on
GC00. What should you do? (Choose all that apply.)
A. Use Active Directory Sites and Services. Select the NTDS Settings object for the GC00 server to clear
the Global Catalog check box.
B. On the GC00 server, run the Ntdsutil utility to defragment Active Directory.
C. On the GC00 server, reinstall Windows 2000.
D. On the GC01 server, run the Ntdsutil utility to enable the global catalog server option.
Answer:AB
2. You are the administrator of a Windows 2000 network. You create global groups and Domain Local
groups for theaccounts payable and accounts receivable departments. The Domain Local group named
AP has Change permission for the Accounts Payable folder. The Accounts Payablefolder is a subfolder of
the Accounting folder. The Accounts Payable global group is a member of the AP Domain Localgroup.
Fred’s user account is a member of the Accounts Payable global group. Fred moves from the accounts
payable department to the accounts receivable department. Fred now needs to access only accounts
receivable information. You remove Fred’s user account from the Accounts Payable global group, but
Fred is still able to access documents in theAccounts Payable folder. What are two possible causes of
this problem? (Choose two.)
A. Fred’s user account has explicit permissions on the Accounting folder.
B. Fred’s user account belongs to another group that gives him permissions on the Accounts Payable
folder.
C. The Accounting folder is not published in Active Directory.
D. The Accounts Payable folder is on a FAT32 partition.
E. The AP Domain Local group is not a member of the Accounts Payable global group.
Answer:AB
3. You add three new SCSI hard disk drives to your company’s domain controller. The SCSI disks are
configured in ahardware RAID-5 array. You have two other physical disks in this domain controller. You
want to optimize the speed of the Active Directory database. What can you do? (Choose two.)
A. Move the Ntds.dit file to the RAID-5 array.
B. Move the log files to a separate physical disk from the operating system.
C. Move the log files and the Ntds.dit file to the RAID-5 array.
D. Move the Netlogon share to the RAID-5 array.
E. Create a mirror volume and place the log files on the mirror.
Answer:AB
4. You are the administrator of a Windows 2000 network. Your current domain controller’s hard disk drive
is failing. Youinstall a new server as a domain controller to replace the failing domain controller. You ran
DCPromo.exe on the failing domain controller in your domain to remove Active Directory. While you were
running DCPromo.exe, the hard disk drive failed. The server will not reboot. However, the objects for the
failed serverare still appearing in Active Directory. You are using the Ntdsutil utility to remove the objects.
You want to remove the old server from Active Directory. Which option should you use?
A. metadata cleanup
B. semantic database analysis
C. security account management
D. domain management
E. authoritative restore
Answer:A

No Comments

최근에 업데이트 될 덤프들

안녕하세요. 70-536CSharp, 050-V37-ENVCSE01, 050-V70-CSEDLPS, ST0-066, 050-V60X-CSEDLPS,이상 덤프들은 최근에 업데이트 될 예정입니다.하루내지 이틀시간이 걸릴것입니다. 시험을 보기로 결심한 각 응시자는 가장 안전하고 최신의 덤프 자료들을 여기서 받을수 있을것 입니다.우리 덤프 한번써 보시면 후회하지  않으실거라 믿습니다많이 애용해 주십시요감사합니다! 그럼 좋은 하루 되세요!

 

아래는70-536CSharp소량의 시험문제:

1.You are developing an application that stores data about your company’s sales and technical support
teams.
You need to ensure that the name and contact information for each person is available as a single
collection when a user queries details about a specific team. You also need to ensure that the data
collection guarantees type safety.
Which code segment should you use?
A. Hashtable team = new Hashtable();
team.Add(1, “Hance”);
team.Add(2, “Jim”);
team.Add(3, “Hanif”);
team.Add(4, “Kerim”);
team.Add(5, “Alex”);
team.Add(6, “Mark”);
team.Add(7, “Roger”);
team.Add(8, “Tommy”);
B. ArrayList team = new ArrayList();
team.Add(”1, Hance”);
team.Add(”2, Jim”);
team.Add(”3, Hanif”);
team.Add(”4, Kerim”);
team.Add(”5, Alex”);
team.Add(”6, Mark”);
team.Add(”7, Roger”);
team.Add(”8, Tommy”);
C. Dictionary<int, string> team =
new Dictionary<int, string>();
team.Add(1, “Hance”);
team.Add(2, “Jim”);
team.Add(3, “Hanif”);
team.Add(4, “Kerim”);
team.Add(5, “Alex”);
team.Add(6, “Mark”);
team.Add(7, “Roger”);
team.Add(8, “Tommy”);
D. string[] team =
new string[] {”1, Hance”,
“2, Jim”, “3, Hanif”,
“4, Kerim”, “5, Alex”,
“6, Mark”, “7, Roger”,
“8, Tommy”};
Answer: C
2.You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C
3.You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. ArrayList al = new ArrayList();
lock (al.SyncRoot)
{
return al;
}
B. ArrayList al = new ArrayList();
lock (al.SyncRoot.GetType())
{
return al;
}
C. ArrayList al = new ArrayList();
Monitor.Enter(al);
Monitor.Exit(al);
return al;
D. ArrayList al = new ArrayList();
ArrayList sync_al = ArrayList.Synchronized(al);
return sync_al;
Answer: D

No Comments

최신덤프 70-443,MB5-845

안녕하세요.요즘 여러분께서Microsoft인증시험 보시느라 수고가 많겠습니다. 세상 살아가기가 쉽지 않네요.그리고 시험이라는게 너무 고지식한것 같아서요 하는 말인데 그나마 시험이라도 쉽게 통과하자는 분들이 있지않을가요? 합격률 100% 덤프가 바로 여러분의 지름길이 되어드리겠습니다. 인증시험문제를 구매한 고객분들은 일년 동안 무료로 업그레이드 서비스를 받을수도 있습니다.생각만 하지 마시고 실천해보시는것이 더 낳지 않나요?아래에는 70-443버전입니다.그 외에 또 MB5-845도 최신 업데이트 되였습나다그럼 고객님 광림을 기대하겠습니다.

시험번호: 70-443

시험이름: Designing a Database Server Infrastructure by Using Microsoft SQL Server 2005
Q&A: 90 Q&As
가격(달러): $ 109.00 $ 89.00 USD
업그레이트: Jan-22-2010
시험문제:
1. You want to consolidate some of the databases onto existing SQL Server computers until additional
hardware can be purchased.
You need to identify which of the servers, in its current configuration, can support additional databases.
You need to ensure that your solution fulfills the company ¯ s securiy requirements while allowing for future
database growth requirements.
Which server and database combination can be used?
A. SQL3 with the OnlineReadOnly and HR databases
B. SQL4 with the TravelOnline and Storefront databases
C. SQL2 with the Storefront and TravelOnline databases
D. SQL2 with the Storefront and HR databases
Answer: D
2. You need to identify the combinations of the Windows operating system and SQL Server 2005 version
that will be the most appropriate for the new R&D configuration, which will include the Research, Parts,
and Engineering databases.
Which two combinations will be the most appropriate? (Each correct answer presents a complete solution.
Choose two.)
A. Windows Server 2003 Enterprise Edition with SQL Server 2005 Enterprise Edition
B. Windows Server 2003 Datacenter Edition with SQL Server 2005 Enterprise Edition
C. Windows Server 2003 Standard Edition with SQL Server 2005 Enterprise Edition
D. Windows Server 2003 Enterprise Edition with SQL Server 2005 Standard Edition
Answer: B AND A
3. You need to improve the speed of backups on SQL1. Management has approved the purchase of
additional hard disks for this server.
What should you do?
A. Configure the hard disks as a RAID-0 array, and store the backups on this new array.
B. Configure the hard disks as a RAID-5 array, and store the backups on this new array.
C. Configure the hard disks as a RAID-10 array, and store the backups on this new array.
D. Configure the hard disks as a spanned volume, and store the backups on this new volume.
E. Use the hard disks to extend the volume that currently holds SQL Server backups.
Answer: A
4. You need to review the current storage system and decide on the best configuration for the tempdb
database on SQL1 to improve tempdb performance. Your solution must ensure that company
requirements and policies are fulfilled.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a RAID-1 set, and move tempdb to this drive set.
B. Create a RAID-0 set, and move tempdb to this drive set.
C. Set the starting size of tempdb to 3 GB.
D. Create a RAID-0 set, and move tempdb and the user database with the largest index to this drive set.
E. Disable automatic file growth on tempdb.
Answer: C AND A
5. You need to improve the performance of the tempdb database on SQL1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Move tempdb onto a faster disk volume.
B. Increase the initial size of tempdb to 1.5 GB.
C. Increase the size of the data files in the Tracking database.
D. Decrease the file growth increment for tempdb to 25 MB.
E. Use more local temporary tables and fewer global temporary tables in the Tracking database.
No Comments

MB5-845,70-443 1월22일 최신 업데이트 됨

안녕하세요. 여러분 IT시험때문에 수고가 많으십니다. 합격률 100% 덤프가 바로 여러분의 지름길이 되어드리겠습니다.저희회사 홈페이지에 오셔서 둘러보십시요. 저희 회사의 MB5-845, 70-443 최신덤프가 여러분의 걱정을 덜어드릴 것입니다.시험을 보기로 결심한 응시자는 가장 안전하고 최신의 공부 자료들을 여기서 받을 있을 것입니다.우리의 목적은 확실하게 고객님 시험을 합격하게 하는 것입니다.그럼 좋은 하루 되십시오.

시험번호: MB5-845

시험이름: POS 2009
Q&A: 50 Q&As
가격(달러): $ 119.00 $ 99.00 USD
업그레이트: Jan-22-2010
시험문제:
1. What file formats does the import wizard allow you to import from?
A. *.txt
B. *.xls
C. *.xml
D. *.csv
Answer: AD
2. Select the Workflow options available in Microsoft Dynamics POS 2009.
A. Prompt for customer on each quote
B. Do not allow sale of out-of-stock items
C. Require details on each transaction
D. Require sales representative
Answer: BD
3. Which of the following is needed to use an existing instance of Microsoft SQL Server 2008?
A. Select “Network Service” from SQL Server Services properties.
B. Enable TCP/IP network protocol and listen on the Microsoft Dynamics POS 2009 port from the SQL
Server properties.
C. Enable Named pipes protocol from the SQL Server properties.
D. Edit the RMSSecured.config file.
Answer: AB
4. What is the minimum amount of RAM needed to run Microsoft Dynamics POS 2009?
A. 256MB
B. 512MB
C. 1GB
D. 2GB
Answer: C
5. What must be done to install more than one Microsoft Dynamics POS 2009 terminal on a LAN that
shares a database?
A. Configure the RMSSecured.config to use the correct SQL instance.
B. Select the remote database from the Create Database Wizard.
C. A port must be opened on any existing firewalls.
D. A common, identical, administrator account and password must be on all machines.
Answer: CD

매달에 제시간 업데이트 할테니까 걱정하지 마세요!

저희회사의 홈페이지 바로가기:http://www.killtest.kr/

No Comments