시험번호: DC0-200
시험이름: Certified Server Professional Exam
Q&A: 120 Q&As
업그레이트: Feb-22-2010
Q&A: 120 Q&As
업그레이트: Feb-22-2010
시험문제:
1. Which three statements are true about installing the Intel drivers and utilities that allow teaming in
Windows 2000? (Choose three .)
A. You must install the ProSet Utility.
B. You must install the Intel driver using floppy diskettes.
C. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
D. If you install the adapters after you have installed the OS, you can get the drivers from the Intel
Network Drivers CD.
E. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel
ProSet Utility CD.
Answer: ACD
2. You need to install Intel NIC teaming for Windows 2000 and you do not have access to the Internet.
From what two sources can you obtain the PROSet software? (Choose two.)
A. Intel Network Drivers CD
B. Dell Server Assistant (DSA)
C. Dell Network Applications CD
D. Windows 2000 Installation CD
Answer: AB
3. Which statement is true about using the Save feature of BASP?
A. It is only available in Windows 2000.
B. It saves a configuration as an executable file.
C. It lets you transfer teaming configurations to other servers.
D. It is used to install and configure the Broadcom Ethernet Controller driver.
Answer: C
4. What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
A. You specify which adaptor will take the entire load. The other NICs will be used only when the
Preferred Primary fails.
B. You specify the desired card for all outgoing traffic for the team. The other members will still accept
incoming packets.
C. You specify the desired card for all incoming traffic for the team. The other members will still transmit
outgoing packets.
D. You specify which adaptor will take the load until it is saturated, then the other members will start
accepting packets until the Preferred Primary is just below the saturation point.
Answer: A
5. You have just installed W2K on your server and you cannot get the server to see your local network.
What can you do to diagnose network connectivity? (Choose three.)
A. verify that the server is configured to use DNS
B. verify that the cable plugged into your server is not a cross-over cable
C. verify that the subnet address is the same as the rest of the working devices on your LAN
D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
Answer: BCD
Windows 2000? (Choose three .)
A. You must install the ProSet Utility.
B. You must install the Intel driver using floppy diskettes.
C. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
D. If you install the adapters after you have installed the OS, you can get the drivers from the Intel
Network Drivers CD.
E. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel
ProSet Utility CD.
Answer: ACD
2. You need to install Intel NIC teaming for Windows 2000 and you do not have access to the Internet.
From what two sources can you obtain the PROSet software? (Choose two.)
A. Intel Network Drivers CD
B. Dell Server Assistant (DSA)
C. Dell Network Applications CD
D. Windows 2000 Installation CD
Answer: AB
3. Which statement is true about using the Save feature of BASP?
A. It is only available in Windows 2000.
B. It saves a configuration as an executable file.
C. It lets you transfer teaming configurations to other servers.
D. It is used to install and configure the Broadcom Ethernet Controller driver.
Answer: C
4. What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
A. You specify which adaptor will take the entire load. The other NICs will be used only when the
Preferred Primary fails.
B. You specify the desired card for all outgoing traffic for the team. The other members will still accept
incoming packets.
C. You specify the desired card for all incoming traffic for the team. The other members will still transmit
outgoing packets.
D. You specify which adaptor will take the load until it is saturated, then the other members will start
accepting packets until the Preferred Primary is just below the saturation point.
Answer: A
5. You have just installed W2K on your server and you cannot get the server to see your local network.
What can you do to diagnose network connectivity? (Choose three.)
A. verify that the server is configured to use DNS
B. verify that the cable plugged into your server is not a cross-over cable
C. verify that the subnet address is the same as the rest of the working devices on your LAN
D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
Answer: BCD
우리회사 홈페이지:www.killtest.kr